Installation Guide

Create Communication with Receiver: *for P1 (relay 1) access code:

1.Carrykeypadtoreceiverlocationforprogramming.

2.EnterAccessCodeforP1(relay1)onthekeypadandcontinuetopressthelastkeyentered(red

lightblinks).

3.PressP1(learnbutton)onthereceiveruntilLD(greenlight)comesonandrelayclicks.

Create Communication with Receiver: *for P2 (relay 2) access code:

1.Carrykeypadtoreceiverlocationforprogramming.

2.EnterAccessCodeforP2(relay2)onthekeypadandcontinuetopressthelastkeyentered(red

lightblinks).

3.PressP2(learnbutton)onthereceiveruntilLD(greenlight)comesonandrelayclicks.

Programming New Master Password: Once created record here for reference __________

1.EntertheMasterPassword“11111”.

2.Enter“8”Ifcorrect,2shortbeeps(if1longbeepisheard,startoverwithstep1).

3.EntertheMasterPassword(upto5digits),iflessthan5digits,“#orB”isrequired.

4.Enter“8”

5.EntertheMasterPasswordagaintoverify.

6.Press“8”Ifcorrect,2shortbeeps-NewMasterPasswordisset(If1longbeepisheard,startover

withstep1).

Programming Master Password Back to Factory Default: (11111)

1.Enter“11111”.

2.Press“8”(longbeep).

3.EnterPUKcode.(PUKmustbe5digits).

4.Press“8”.

5.EnterPUKcodetoconrm.

6.Press“8”(2beeps)Masterpasswordresetcomplete.

Changing Keypad Security Code:

ThiskeypadhasavirtualdipswitchusedtocreateyourSecurityCode.Thevirtualdipswitchcontainsnine

3-positionswitches.Toensureneighboringkeypadsdonotinterferewitheachother,thevirtualswitches

shouldbepositionedinarandompattern,usingthefollowingprocedure.

ExampleofrandompositioningofthevirtualdipswitchestocreateaSecurityCodeisshownbelow.To

entertheSecurityCode,enterthedipswitchnumber,followedbythedipswitchpositioncharacter.

The Security Code would be entered as: 1# 20 3* 4* 5# 6* 7# 80 9*

Dipswitch

Position

Switch

# X X X

0 X X

* X X X X