Wood Furnace Parts & Boiler Treatments Pages 3-5 Install Kits & Electronic Controls Pages 8-11 Pumps, Flanges & Cartridges Pages 12-14 SharkBite and Pex Fittings Pages 16-17 Copper, Brass & Black Fittings & Nipples Pages 18-21 Boiler Parts, Tools & Trade Accessories Pages 6-7, 15, 22-23 Plate & Sidearm Heat Exchangers Pages 24-25 Tube-Shell & Water to Air Heat Exchangers Pages 26-30 Unit Heaters & Air Handlers Pages 32-33 Pex Tubing & Underground Insulation Page 34-35 888-881-1602 AltHeatSupply.
Version 17 About Us: We are a hard working, family team. Our business motto is “We are only as good as our customers.” This business exists because of you!! We live in Connecticut with our three children and have been in the wood furnace business for over 10 years. After selling and installing hundreds of wood stoves ourselves, we are able to help you with everything from sizing the stove, parts for installation and supplies for proper maintenance.
Version 17 Best Seller Best Seller FN446 Dayton 4C446 (6FHX8) - Shaded pole blower, air flow @ 0.000 inch static pressure 148 CFM, speed 3160 , Voltage rating 115 VAC, current rating 1.37 Amps, frequency 60/50 HZ, thermal protection auto, wheel diameter 3 13/16 In, wheel width 2 1/2 In, inlet diameter 3 1/8 In, air flow @ 0.100 In static pressure 141 CFM. This is probably the most used blower in the outdoor wood furnace industry.
Version 17 Made in the USA! Item Part # Description Price ProTech 300 Boiler Treatment - Has been designed to be used in boiler treatment programs at a lower cost. These programs insist the boiler owner meet certain nitrite levels in order to comply with warranty requirements in regards to boiler corrosion protection. Adding 1 gallon of ProTech 300 to 300 gallons of boiler fill water will yield +/- 1000 ppm nitrite. Suggested nitrite levels are: 750ppm = Adequate, 1000 ppm = Good, 1500 ppm = Great.
Version 17 Made in the USA! Item Description Price Yearly Maintenance Kit 300 Gallon Unit - One Gallon ProTech300, a ProTech Test Kit and a pH Test Kit 600 Gallon Unit - Two Gallons ProTech300, a ProTech Test Kit and a pH Test Kit 300 Gallon Unit YMKit300 $61.99 600 Gallon Unit YMKit600 $96.99 NEW KITS Wood Master Maintenance Kit Everything you need for yearly maintenance of your Wood Master.
Version 17 SD001 Snap Disc - Snap Disc Control, Limit, Automatic Reset, Switch Action Open on Rise, Switch Type SPST, Temp. Range (F) 150 to 190, Differential 40, Inductive Amps @ 120V 10, Inductive Amps @ 240V 5, Pilot Duty Contacts (VA) 125, Resistive Amps @ 120V 25, Resistive Rating 240V 25, Voltage Range 120 to 277, Switch Closes @(F) 150, Switch Opens @(F) 190 $10.87 SD005 Snap Disc - Snap Disc Control, Adjustable Limit, Automatic Reset, Switch Action Open on Rise, Switch Type SPST, Temp.
Version 17 ETC Assembly - Wood Master ETC Panel New. This is a Brand New ETC Panel that is used with the Wood Master 3300, 4400, 5500 and 6500 Models. Extremely easy to Install with the quick connect. Comes pre-programmed. Reconditioned ETC Assembly - Some times settings reset or there is water damage or it just stops working. So we simply repair and reprogram the control panel. Simply take off your bad one and put this into place.
Version 17 DWkit Domestic Hot Water Kit Designed to be used with the brazed plate ex- DWkit changer being mounted on a domestic hot water tank. All fittings shown are included in the kit to simplify the order process and to get those hard-to-find parts. We only use DWkitsb high quality fittings and parts. DWkitsb comes with SharkBite® fittings. $47.75 $57.59 SDWkitsb Shaver Internal Domestic Hot Water Kit Designed for wood fur- naces with domestic hot water coils inside the wood furnaces.
Version 17 SDKitComplete Complete Shaver Damper Kit This is a great kit to Upgrade your Shaver Wood Furnace. And we’ve done most of the work for you!! Everything comes already assembled and is very simple to use. You will have the ability to set the water temperature and differential anywhere you like depending on the season.
Version 17 AQ001 Well Immersion Control - L6006A 1012, contact current rating @ 120 VAC 8 Amps, contact current rating @ 240 Vac 5.1 Amps, differential 5-30° F, switch action SPDT, temperature setting range 100-240° F, height 5 3/8 in, width 2 in, depth 2 1/8 in (immersion well included). This aqua-stat is used to control most older wood boilers. The drywell has a 1/2” thread.
Version 17 AQ005 Therm-O-Disc - 59T4090 Thermostat, lower or 1 element, surface mount, manual reset 90° - 150° F, wood furnaces use this to turn on fans or pumps, 120 VAC. Commonly used for potable water. $11.86 AQ006 Therm-O-Disc - 59T4200 Thermostat lower, surface mount, manual reset 120°-180° F, some wood furnaces use this to turn on fans or pumps, 120 VAC. Used on the back of Shaver furnaces. $15.
Version 17 Water Pumps Made in the USA! BF = Bronze Flanged. 3,4,5 = a design change that does not affect interchangeability. J = Bronze Cartridge. Do Not be fooled by the basic model “00” pumps they will fail sooner! (Read the “Important” section below) Taco 007 BF5-J Pump (Cast Iron pump with a Bronze Cartridge) Part # TP007 New Lower Price $79.99 ea. or (2 or more) Price $69.
Version 17 Water Pumps Astro 2 Cast Iron Pumps (3 Speed) Should be used in closed loop systems Part # Full Load Amp Draw (A) Price (each) Price (2 or more) Astro 230-3 (110223-305) ARM30-3 0.81 - 1/25hp $89.99 $81.99 Astro 250-3 (110223-307) ARM50-3 0.98 - 1/20hp $116.99 $106.
Version 17 Made in the USA! Freedom Flanges A Quality Flange, Not a Cheap Look a Like! — — — — Fits all Taco “00” circulators, Armstrong and most flanged pumps Easy-on, easy-off with an adjustable wrench Stronger than standard cast iron Available in 3/4” & 1” Part # Best Seller Description Price Best Seller Box Price PF034 3/4” NPT Flange $11.99 $9.99 ea. PF001 1” NPT Flange $11.99 $9.99 ea.
Version 17 Part Description Price BTOkit Boiler Trim-Out Kit - Is for use on commercial and residential closed loop BTOkit01 $154.45 hydronic heating systems. Included in the kit are: an air vent (AV18), an air purge, a combination fill valve and backflow preventer (BFPRV) and an ET30 series expansion tank. BTOkit02 $154.45 BTOkit01 = 1” thread Air Purge (AP01) BTOkit02 = 1 1/4” thread Air Purge (AP114) DFS01 Dwyer Model FS-2 Paddle Flow Switch - Offers an economical flow im- proving solution.
Best Seller Part Don’t Be Swayed By Lesser Quality Description SharkBite® 90° Elbow Part # Size SB912 SB934 SB901 1/2” 3/4” 1” Price/each Price ea./bag Qty $5.99 $6.99 $14.99 $5.59 $6.79 $13.99 12 12 6 x 1/2” x 3/4” x 1” X 3/4” x 3/4” $4.59 $4.99 $10.99 $10.99 $5.29 $4.29 $4.79 $10.49 $10.49 $4.99 12 12 6 6 6 SharkBite® x MPT SBM12 SBM34 SBM01 SBM0134 SBM1234 SharkBite® x FPT SBF12 SBF34 SBF01 1/2” x 1/2” 3/4” x 3/4” 1” x 1” $4.69 $4.99 $10.49 $4.52 $4.79 $10.
The Best Prices Around! Best Seller Part Part Description Part # Size Price/each Version 17 Price ea./bag Qty Pex x MPT PM0101 PM0134 PM3434 PM3412 PM1212 PM1234 Pex Coupler PC01 PC34 PC12 Pex 90° Elbow P901 P934 P912 P9M1212 1” 3/4” 1/2” 1/2” x 1/2”mpt $2.77 $1.80 $1.49 $2.39 $2.49 $1.65 $1.39 $2.16 10 25 25 25 Pex Tee PT01 PT34 PT12 PT343412 1” 3/4” 1/2” 3/4” x 1/2” $3.87 $2.02 $1.41 $2.81 $3.36 $1.99 $1.24 $2.
Copper Fittings Part Description Version 17 Part # Size Price/each Price ea/bag Qty 1/2” 3/4” 1” $0.84 $1.79 $4.99 $0.78 $1.62 $4.69 25 25 10 90° Sweat Elbow SW912 SW934 SW901 MPT x Sweat SWM0134 SWM34 SWM01 1” x 3/4” 3/4” 1” $6.99 $2.79 $4.79 $6.69 $2.39 $4.59 25 25 10 Sweat x FPT SWF3401 SWF01 3/4” x 1” 1” $7.99 $5.99 $7.49 $5.59 25 10 Sweat Coupler with Stop SWC12 SWC34 SWC01 1/2” 3/4” 1” $0.42 $0.94 $2.29 $0.35 $0.85 $1.
Brass Fittings Part Version 17 Description Part # Size Price/each Price ea/bag Qty 3/4” 1” $10.05 $13.99 $9.05 $13.29 10 10 1” x 3/4” 1” x 1/2” $5.79 $3.51 $5.13 $2.85 10 10 FPT Brass Union BRU34 BRU01 Brass Reducer Bushing BRB0134 BRB0112 Brass Street 90° BRS934 BRS901 3/4” 1” $8.99 $8.99 $8.45 $8.45 10 10 Brass 90° Elbow FPT BR934 BR901 3/4” 1” $6.99 $6.99 $6.39 $6.39 10 10 2” Brass Nipple BRN3402 BRN0102 3/4” 1” $3.99 $4.99 $3.39 $4.
Black Malleable Fittings Part Description Part # Malleable Iron Union BKU01 BKU114 Malleable Iron Bushing BKB0112 BKB11412 BKB11434 BKB11401 Malleable Iron Cross Version 17 Size Price/each Price ea/bag Qty 1” 1 1/4” $5.99 $6.99 $5.49 $6.49 10 10 1” x 1/2” 1 1/4” x 1/2” 1 1/4” x 3/4” 1 1/4” x 1” $1.49 $2.99 $2.99 $1.95 $1.29 $1.89 $1.69 $1.79 10 10 10 10 BKC114 1 1/4” $8.99 $7.99 10 Malleable Iron 90º Straight Elbow BK912 BK934 BK901 BK9114 1/2” 3/4” 1” 1 1/4” $0.85 $0.99 $1.79 $2.
Black Nipples Version 17 Description Part # Price 1/2" x Close Black Nipple BKN12C $0.79 1/2" x 2" Black Nipple BKN1202 $0.79 1/2" x 3" Black Nipple BKN1203 $0.84 1/2" x 4" Black Nipple BKN1204 $1.19 1/2" x 6" Black Nipple BKN1206 $1.58 1/2" x 8" Black Nipple BKN1208 $2.29 1/2" x 10" Black Nipple BKN1210 $2.89 1/2" x 12" Black Nipple BKN1212 $2.99 3/4" x Close Black Nipple BKN34C $0.89 3/4" x 2" Black Nipple BKN3402 $0.89 3/4" x 3" Black Nipple BKN3403 $0.
Version 17 Part Description Price TG101 Dial Thermometer - Short stem length of 1 3/4”, a temperature range of 32° to $14.37 250°F, 2.5” face, center back mount, 1/2” NPT thread. TPG14 & TPG12 Tridicator - Honeywell Sparco, non-corrosive Valox® case, 1/2" or 1/4” NPT connection, graduation from 60° to 320° F, Max Pressure: 75 PSI. TPG14 $19.95 TPG12 $25.55 PG101 Pressure Gauge - 2” face, up to 30 PSI, 1/4” NPT brass lower connection, black $12.76 steel case, for water, oil & gas.
Version 17 Part Description Price PCT0138 & PCT1234 Mini Crimp Tool - That gets the job done. By tightening the 2 bolts. This tool is excellent to be accompanied by the larger crimp tool for those hard to reach areas. See Page 17 for quantity discounts. $29.99 PCT0138 Crimp 1” & 3/8” rings PCT1234 Crimp 1/2” & 3/4” rings PKK01 Kwik Cut - Model T100. Cuts up to 1” polyethylene pipe rubber hose, Pex or PVC. Replaceable blade, clean cut every time.
High Quality at the Best Price! Version 17 Plate Heat Exchangers High Quality & Designed for Maximum Performance, the plate heat ex- changer's compact, rugged assembly is composed of 316L stainless steel plate packs sealed together by means of brazing copper along the border of the units. This eliminates the need for traditional gaskets or external pressure retaining parts.
Version 17 50% More Efficient than Copper Sidearms! A A B B High Quality Fin-Enhanced Sidearm Heat Exchangers are designed with the natural thermo-siphon concept on the domestic hot water side. Made of 304 stainless steel, fin-enhanced sidearms increase heat transfer efficiency significantly by using a finned tube internally, which has a surface area five to eight times bigger than bare tube and produces greater turbulence on the system side. Traditional sidearms are made of two bare copper tubes.
**NEW** Pool Ready Version! No Additional Cost! Cupro-Nickel Heat Exchangers Cupro-Nickel Innovation: Cupro-Nickel heat exchangers are suitable for applications ranging up to 1 million btu/hr. These units are easy to maintain as both the end covers and tube stack can be removed easily for cleaning. CN Series pool heat exchangers are the only swimming pool units with this feature. Version 17 Part # Inlet Outlet Price CN200-CPVC 1” NPT 1 1/2” NPT $849.99 CN400-CPVC 1 1/4” NPT 2” NPT $1289.
Version 17 Tube & Shell Heat Exchangers are suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows around the tubes (through the shell) to transfer heat between the two fluids. Ideal for many residential and industrial applications. The complete stainless steel welded structure ensures product strength and high quality performance.
Water to Air Heat Exchangers Version 17 Our Ports work with Sharkbite® Fittings Original Copper Highest Quality in the Business! Features: Copper Features: Aluminum fins are 12 per inch, with a 22 gauge galvanized steel frame 3/8” seamless tubing, 3 core construction for better heat exchange High flow of 12 GPM, 175 psi and can handle up to 350°F Highest Quality in the business! Prices & Sizes: Part # HTL 12x12 HTL 12x18 HTL 12x24 HTL 16x16 HTL 16x18 HTL 18x18 HTL 18x20 HTL 19x20 HTL 20x20 HT
Water to Air Heat Exchangers Specifications Don’t be Fooled by Price! Version 17 Buyers Beware! We Have the Highest Quality Heat Exchangers at the Best Prices! There are companies selling similar kinds of heat exchangers at prices lower than ours. We have purchased them to compare them to our quality and there are way too many differences to mention here! Our Heat Exchangers are High Quality and Built to Last! They are a great fit for a variety of heating and cooling applications.
Version 17 Model 16x18 18x18 18x20 19x20 20x20 22x22 22X30 22x25 24x24 GPM 5 CFM 800 APD 0.18 LAT 1000 0.26 LAT 1200 0.35 LAT 0.46 LAT WPD BTU 65563 140 74152 133 82598 128 89045 123 0.72 71288 147 82154 140 91567 135 99843 130 2.59 12 72310 148 83611 141 93472 136 102203 132 3.63 GPM 5 1200 APD 0.29 LAT 1400 BTU 1600 0.37 LAT 0.47 0.58 LAT WPD 85400 130 92166 125 98057 121 103251 118 0.
Version 17 Class A Chimneys & Accessories Part# Security Chimney Extensions Price CX648 Security Chimney 6” X 48” $159.99 ** CX848 Security Chimney 8” X 48” $239.99 ** Security Chimney 10” x 24” $221.99 ** Security Chimney 10” x 48” $345.99 ** CX124 CX148 10” MUST BE SPECIAL ORDERED Chimney Caps CX601 Security Chimney 6” Deluxe Cap $55.99 CX801 Security Chimney 8” Deluxe Cap $70.99 CX101 Security Chimney 10” Deluxe Cap $121.
New Dragon Breath Mini Space Heaters Version 17 Dragon Breath Mini Space Heaters Instead of installing a new complete heating system, simply mount a Dragon Breath Mini Air Handler just about anywhere. They are used to heat bonus rooms, small houses with electric heat, basements, garages, workshops, greenhouses, warehouses and anything you can think of.
High Quality at the Best Price! Version 17 New Options Dragon Breath Space Heaters mount just about anywhere. They are used to heat basements, garages, workshops, greenhouses, warehouses and anything you can think of. These units come with a high quality fan, water to air exchanger and adjustable louvered grills. The fans are speed controllable (SC36) and are commercial grade units. Stamped fan blades quietly exhaust high air volumes. All parts used are high quality.
Version 17 Best Seller Part # 5.5" O.D. - Increased insulation protection Joint-free installation & end caps included 50% more insulation than 4" (competition) Easy to install Density 1.5 lb Made in USA High flexibility R-Value 8.5 2 Line or 4 Line available Closed cell insulation Description (Non-Barrier A-Quality Pex) Price ValuFlex NB 2 - 1" non- barrier pex $6.79 per ft. + freight ValuFlex NB0134 2 - 1" & 2 - 3/4" non- barrier pex $8.29 per ft.
Version 17 Made in the USA! We receive a lot of phone calls asking why “some pex is less expensive” and “what is Class A pex?” We can’t give that much information even if we had several pages to work with. Bottom line is... you get what you pay for! And with the high temperatures we are working with this is not the place to try to save a couple dollars.
What do you do when the power goes out? Version 17 Made in the USA! SF 512 SF 503B SF 707 822 PS SF 952 SF 709 1622 PS NEW SUREFIRE SINE WAVE SENTRY MODELS STOVE SENTRY MODELS SPECIFICATIONS WELL PUMP SENTRY SUMP PUMP MODELS SF 512 SF 503B SF 707 SF 709 SF 952 822 PS 1622 PS Normal Mode Operation (Supplying Line Power) Input Voltage Range 100-128 VAC 100-128 VAC 100-128 VAC 100-128 VAC 240 VAC 100-128 VAC 100-128 VAC Input Current 5.
