Specifications

ManualsBrandsSentry ManualsConsumer electronicsSentry Xpress Sentry Xpress 4.0

Paragon Kiln Limited Warranty

Paragon kilns are warranted to the original purchaser by Paragon Industries, L.P. (herein

Paragon), subject to the listed exclusions below, to be free of defects in workmanship for the

periods specified below. The warranty period begins from date of shipment fromthe Paragon

factory unless date of original purchase from an authorized Paragon distributor or dealer can

be established.

Warranty Periods

QuickFire kilns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 months

J-series,SC-series,HT-series,KM-Series,andVulcan. . . . . . . . . . . . . . . . 1year

(Vulcan elements are not warranted)

Kilns with a maximum temperature rating above 2300ºF

(exceptDragons,IguanaandVikings) . . . . . . . . . . . . . . . . . . . . . . . . 1year

TnF 2 controllers, GF, GL, and Fusion series kilns rated 2000°F orlower and all other kilns

with a maximum temperature rated2300ºF orlower . . . . . . . . . . . . . . . . 2 years

Controllers: Sentry (12 key): 2 ½ years; Sentry Xpress (3 key): the length of the new kiln’s war

ranty or 1 year on replacement controllers for older kilns.

Dragon, Super Dragon, Iguana and Viking kilns: 2 years. S-Type thermocouple and APM ele

ments fall within the 2 year warranty. Sentry controller: 2 ½ years. Standard elements: 6

months. Type-K thermocouple is not warranted on the Dragon, Iguana and Viking.

These warranty periods apply unless otherwise agreed to in writing.

This warranty excludes: 1) Kilns or furnaces damaged by overfiring (exceeding the melting

temperature of the material being fired) regardless of cause of overfiring; 2) Ware, tools, kiln

furniture, or anything inside damaged by overfire; 3) Kilns allowed to exceed the maximum

temperature shown on kiln’s nameplate, regardless of cause; 4) Kilns subjected to abuse,

neglect, freight damage or improper storage; 5) Kilns used for either reduction or salt firing, 6)

Kilns damaged by improper electrical installation; 7) Kilns used for purposes other than firing

ceramics, glass, heat treating, or the purpose for which it was intended;8) Element burnout

caused by contact with foreign materials; 9) The patented Dawson Kiln Sitter and/or Limit

Timer manufactured by W.P. Dawson, Inc., 399 Thor Place, Brea, California 92621.

WARRANTY COVERAGE EXTENDS ONLY TO THE ORIGINAL PURCHASER

AND DOES NOT COVER REPLACEMENT OF PARTS THAT ARE, BY THEIR

NATURE, EXPENDABLE. THIS WARRANTY IS VOIDED IF THE PRODUCT IS

ADVERSELY AFFECTED BY ATTACHING ANY FEATURE OR DEVICE TO IT, OR IS

IN ANY WAY TAMPERED WITH OR MODIFIED WITHOUT EXPRESS WRITTEN

PERMISSION FROM PARAGON INDUSTRIES, L.P.

Paragon Industries, L.P., will repair or replace any parts that become defective under

normal and proper use during the specified period for the kiln purchased, providingthe kiln

has not been subjected to misuse or the listed exclusions. Paragon will furnish and install

replacement parts at the factory with transportation costs to and from the factory paid by the

owner; or upon receipt of defective parts at the factory, and afterfactory examination of the

defect, Paragon will furnish replacement parts, complete with installation instructions, shipped

postpaid to owner. The warranty on the repaired and/or replaced parts will be limited to the

unexpired term of the original warranty.

Any claim for adjustment under this warranty must include name and address of dealer

from whom kiln was originally purchased. Repair or replacement of anydefective parts shall

fulfill all obligations of Paragon. No other obligations or liabilities are assumed in connection

with Paragon kilns nor does Paragon Industries, L.P. authorize its distributors or dealers to

assume any other obligations or liabilities on its behalf.

THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING

BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL PARAGON

INDUSTRIES, L.P. BE LIABLE FOR ANY LOSS OF PROFITS OR ANY INDIRECT OR

CONSEQUENTIAL DAMAGES ARISING OUT OF ANY SUCH DEFECT IN

MATERIAL OR WORKMANSHIP. NOTE: SOME STATES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM

AGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

This agreement is made in the State of Texas and its validity, construction, and all rights

under it will be governed by the laws of the State of Texas. This warrantygives you specific

legal rights, and you may also have other rights, which vary from state to state.

240 13 3,120 12 20 6-20R

120 12 1,440 14 15 5-15R

120 8 960 14 15 5-15R

120 14 1,680 12 20 5-15R

120 20 2,400 12 20 5-20R

240 20 4,800 12 20 6-20R

120 15 1,800 12 20 5-15R

240 20 4,800 12 20 6-20R

240 30 7,200 10 40 6-30R

240 20 4,800 12 20 6-20R

240 38 9,000 6 50 6-50R

240 48 11,500 6 50 6-50R

240 69 16,500 4 75 Direct

240 30 7,200 10 40 6-30R

240 17 4,000 12 20 6-20R

240 30 7,200 10 40 6-30R

240 48 11,500 6 50 6-50R

240 20 4,800 12 20 6-20R

240 45 10,800 6 50 6-50R

240 30 7,200 6 50 6-50R

240 45 10,800 6 60 6-50R

120 15 1,800 12 20 5-15R

240 9.2 2,200 12 20 6-20R

120 20 2,400 12 20 5-20R

240 10 2,400 12 20 6-20R

240 20 4,800 12 20 6-20R

240 40 9,600 6 60 6-50R

240 45 10,800 6 60 6-50R

240 48 11,520 6 60 6-50R

120 13 1,560 12 20 5-15R

120 12 1,440 14 15 5-15R

120 15 1,800 12 20 5-15R

240 17 4080 10 30 6-30R

Circuit Size

Electrical Power Copper Fuse NEMA

Volts Amps Watts Wire Size Config.