Operation Manual

7
English
Programmable Electronic Lock
NOTE: Onlyonesecondarycodecanbeprogrammedatatime.
ToADDausercode:
1
 Pressthe“P”keytwotimes.
2
 Enterthe5-digitusercode.
3
The light will flash green and then you will have five
secondstoenteryourown5-digitpersonalsecondarycode.
ToDELETEasecondarycode:
1
 Pressthe“P”keytwotimes.
2
 Enterthe5-digitusercode.
3
 Enter0,0,0,0,0.
NOTE: TheelectroniclockwillNOTindicatethatithasdeletedthesecondarycode–
pleasetestthecodetomakesureithasbeendeleted.
NOTE: Delay mode will occur if three consecutive invalid entries have been tried. This will cause
thesystemtoshutdownfortwominutes.DoNOTremovethebatteriestorestartthe
system – it will only increase the length of time for the system to shut down.
Programming the secondary code
321165_FireSafeManual.indd 7 12/12/11 2:11 PM