Product Manual

Getting started
1
Moving the product into place:
SentrySafe products are heavy, and
extra caution is advised when moving
them into place. SentrySafe does
NOT recommend removal of doors.
Minimum safe depth may be achieved
by fully opening the door or doors.
To install the smaller safes and
cabinets, we recommend using an
appliance dolly, which can be obtained
from a local rental service. For the
larger safes, we recommend
that professional movers install the
product.
Do not use the product’s handles to lift
or move the product because damage
to the latching system may result. To
protect the product from paint nicks or
scratches, make sure that the product
will not rub against any metal surface
of the dolly before proceeding further.
Next, tilt the product and slide the
bottom plate of the dolly under it.
Securely strap the product to the dolly,
and move to the desired location. To
unload, tilt the dolly forward, remove
the product from the dolly and gently
slide into place. All products are
designed to be used in a level and
plumb condition properly.
Use a carpenter’s level to insure a
proper resting attitude. Use shims
where necessary. The product must be
level to function properly.
Locking instructions
2
Congratulations! You’ve taken an important step in organizing and protecting your vital information. Your SentrySafe cabinet or safe is
designed to meet the rigid UL standards for fire protection equipment. It has also been built to meet the highest quality requirements
and will give you a lifetime of protection and service. Simple installation, maintenance and service instructions are presented on the
following pages. If you need further information contact your dealer or SentrySafe Customer Service.
The lock manufacturer’s guide is
located inside your product. If this
information is missing or damaged,
please contact SentrySafe Customer
Service at 800-828-1438, and we will
be happy to issue you a new one. For
technical support, please select the
following Technical Service number that
corresponds to your particular lock:
La Gard
(24 hours a day / 7 days a week)
800-523-9605
949-574-2860 Fax
Kaba Mas
888-950-4715 ext. 421
Sargent & Greenleaf
800-826-7652 ext. 260
Setting up your product
Trouble-free operation of safes and cabinets
Special Features
3
Note: All safes and cabinets may emit
a noticeable paint odor when fi rst
received. These fumes pose no threat to
users or to information stored within!
The odor will dissipate over time as the
product is opened and used.
No Hazardous Materials
Products manufactured by SentrySafe
do not release or otherwise result
in exposure to hazardous chemicals
under normal conditions of use. No
asbestos is used in our products.
Since all safes and cabinets are not
ventilated, the air inside the unit
should be circulated by opening the
doors weekly during the fi rst year of
service and monthly thereafter.
Class 350 Record Safes and Cabinets
are designed to protect paper records
only. Do not use these products for
storage of magnetic or fi lm media.
Class 125 Media Safes and Cabinets
offer protection for fi lm and magnetic
media.
Class 150 Media Safes and Cabinets
offer protection for EDP media and
photographic records.