Fire-Safe Owner’s Manual Meijer.
Warnings WARNING Gun warning This product is not intended for the secure storage of all materials. Items such as firearms, other weapons, combustible materials, or medication should NOT be stored in this unit. WARNING DO NOT store delicate items directly in your safe. SentrySafe products which offer fire protection have a proprietary insulation that has a high moisture content.
Table of Contents Français ..................................................................................................... 17 Español....................................................................................................... 33 Warnings............................................................................................................... 2 Registration...........................................................................................................
Mechanical Combination Lock NOTE: • Store combination (and keys if equipped) in a secure location (other than in the safe). • Combination can not be changed. • SentrySafe offers a secure online location for the entry and retrieval of your combination. Go to www.sentrysafe.com and register your safe. Preparing your safe for first time use Ensure any shipping screws have been removed. Located on the inside of the door. 1 • DO NOT RETURN! Questions or concerns, call us at 1-800-828-1438.
Rotate the dial to the right (clockwise), stop when you reach the third number in your combination. 5 Rotate the handle downward to open the door. English 4 This may take a limited amount of force if you have a water resistant safe. NOTE: • Make sure the handle is in the horizontal position when unlocking the safe. • If the door does not open easily, repeat steps 1-5. • If you exert too much force on the handle, the handle will move without moving the bolts.
Programmable Electronic Lock NOTE: • Store code (and keys if equipped) in a secure location (other than in the safe). • SentrySafe offers a secure online location for the entry and retrieval of your code. Go to www.sentrysafe.com and register your safe. Preparing your safe for first time use Ensure any shipping screws have been removed. Located on the inside of the door. 1 • DO NOT RETURN! Questions or concerns, call us at 1-800-828-1438. 2 A Slide out the battery drawer on the side of the keypad.
2 Enter the 5 digit factory code on the back of the owner’s manual. B A green light will indicate the code is correct. You will have 4 seconds to turn the handle to unlock your safe. English A Rotate the handle downward to open the door. 3 This may take a limited amount of force if you have a water resistant safe. NOTE: • Make sure the handle is in the horizontal position when unlocking the safe. • If you exert too much force on the handle, the handle will move without moving the bolts.
Programmable Electronic Lock Programming information Three code options: Factory code: The safe will ALWAYS unlock using this 5 digit code (found on the back of the owner’s manual). This code cannot be deleted. User code: A 5 digit programmable code of your choosing that can be changed or deleted. Secondary code: A 5 digit programmable code of your choosing that can be changed or deleted. Can only be programmed after a user code has been activated. NOTE: The “C” key is a clear key.
Programming the secondary code Only 1 secondary code can be programmed at a time. English To ADD a secondary code: 1 Press the “P” key two times. 2 Enter the 5 digit user code. 3 The light will flash green and then you will have five seconds to enter your own personal secondary code. To DELETE a secondary code: 1 Press the “P” key two times. 2 Enter the 5 digit user code. 3 Enter 0,0,0,0,0.
Operating the Light How to operate the light The safe you have purchased may include a light. This is a long-lasting LED light. Not all safes include a light. The batteries that operate the keypad are the same batteries that operate the light. If the light in your unit does not turn on, please change your batteries. Refer to page 6 to change the batteries. The light will turn on every time you enter your code and will remain on for 30 seconds.
Bolting Down Your Safe Bolt down instructions English Warning: P roduct is not water resistant once it is bolted down. The ETL verified water resistance claim applies to product prior to the application of a bolt-down kit. Bolt down kit contents (in select models only): • 2 lag screws. • 2 washers. • 2 masonry anchors. Tools needed to bolt safe to the floor: • Drill. • Wrench. • 7⁄16” (11 mm) drill bit – for drilling into the safe. • 9⁄32” (7.2 mm) drill bit – for drilling into a wood floor. • 3⁄8” (9.
Bolting Down Your Safe Bolt down instructions… continued 5 Move the safe aside to clear both marked spots for drilling. Drill into the floor: 6 A For wood: Using the 9⁄32” drill bit, drill a hole 21⁄2” (64 mm) deep in each marked spot. B For masonry: Using the 3⁄8” drill bit, drill a hole 21⁄2” (64 mm) deep in each marked spot. Install a masonry anchor in each hole. Replace the safe in the desired position, with the holes in the safe aligned with those in the floor.
Troubleshooting Why it is Happening: The Solution: The door will not lock Shipping screw is in place Remove the screw on the back inside of the door The handle is not in the horizontal position when the safe is locked The clutch mechanism has been engaged Rotate the handle up or down until it clicks into the horizontal position Cannot open door after inputting the electronic code Safes doors equipped with a water resistant gasket may initially be tight Hold the handle up while inputting the code a
Customer Service Customer Service www.sentrysafe.com Customer Service: 1-800-828-1438 Fax: 585-381-2940 900 Linden Avenue / Rochester, New York / 14625-2784 USA How to get replacement key/combo 1 Please go to our website www.sentrysafe.com to find the necessary replacement form. If you are unable to use a computer please call the number above or fax us for a copy of replacement form. 2 Find your safe’s serial number and model number.
Guarantees & Fire Specifications Guarantees LIFETIME AFTER-FIRE REPLACEMENT GUARANTEE Include your name and address, the model number, a photo of the burned unit, a description of the fire, along with a copy of the fire department, insurance or police report. Please send the following information to: English If this SentrySafe product is damaged by fire at any time while still owned by you (the original owner), SentrySafe will ship a replacement free of charge.