User's Manual

11
*Note: The mobile phone does not support hot-plug function of T-FLASH in “power on” mode. Only when the mobile
phone is powered off can T-FLASH be pulled out. Restart up and T-FLASH will come into effect.
When using or editing files stored in the memory card, DO NOT pull out the memory card.
3 Basic Description
3.1 About the Keypads
3.1.1 Basic Keys
Name Functions
Center key Enter the main menu interface
Right soft key Enter the phonebook; carry out the corresponding operations
displayed on the right bottom of the screen.
left soft key Enter the main menu interface; carry out the corresponding
operations displayed on the left bottom of the screen.
SIM Send key Answer, dial, receive calls for SIM
End key Short press: return to standby interface in any mode
Long press: Power off(Power on in power off state)
Home key Go to the main menu.
MSM key To enter the SMS menu, can write, view, delete, set the SMS
and other operations.
Numeric
keys
0 Long press: Lock screen and the unlock screen.
1 Short press: go to number input screen and input number 1
Long press: Call voicemail.
2~9 Short press: go to number input interface and input numbers
2~9.
*
Short press: go to number input screen and shift input *
# Short press: go to number input screen and input #
Note: In this manual, “short press” a key means press then quickly release the key; “long press” a key means
press the key and hold for not less than 2 seconds
3.2 Call functions
¾ When the logo of the network service provider appears on the screen, you then may make or answer a call. The info
bar implicates the signal intensity on the top left screen (the 4-scale info bar means the signal is the strongest).
¾ Call quality performs variedly under the influence of the obstacles. Therefore the movement in a small scope may
improve the signal intensity effectively.
3.2.1 Make a call
¾ Domestic call: