User's Manual

11
Installing Memory Card
Your device supports T-Flash card, which is a multimedia memory
card used to multiply the memory of the device. The T-flash card is
small and should be pulled out and installed carefully and prudently
in order to avoid any kind of damage.
 Switch off your device.
 Remove the battery cover.
 Slide the T-Flash card into the slot.
 Attach the battery.
 Push the battery cover until it clicks into place.

Charging the Battery
The device prompts a warning tone and message stating insufficient
battery when the battery power of your device is low.
Please follow the instructions mentioned below to charge your device:
 Plug the connector of the charger into the jack of the
device.
 Plug the charger into a standard AC wall outlet.
Note:Whenpowercharging is shown on the screen,it indicates thatthere is
notenoughpowerandyoushouldnowchargeyourdevice.Whenchargingis
complete,thebatteryiconwillstopflashing.Youmustfullychargethebattery
before using the device for
the first time. It is recommended to charge the
batteryforfourhoursbeforeusingthedeviceforthefirsttime.Ifthedeviceis 
turned on during charging, you can still make or answer calls, but this will