Quick Start Guide

You also can refer to the label on the backside of the router for the default IP address
and password.
It’s strongly suggested to change the default login password of the WebUI to prevent
unauthorized users from changing the routers’ settings.
4 Connect to WiFi Network
You can connect your computer or mobile phone to the router’s WiFi network.
Default SSID: 4G-CPE-2G-XXXX（XXXX is last 4 digits of MAC address）
Default Password: 12345678
It’s strongly suggested to change the default SSID and password by accessing to the WebUI WiFi
management page to prevent unauthorized access to your WiFi network.
You need to reconnect to the router’s WiFi network after changing the WiFi password.
5 Access the internet through the WAN port
You can connect the router’s WAN port to the wall-mounted Ethernet port by Ethernet cable, and
then choose the working mode to be Broadband mode and configure the PPPoE/Static/DHCP
parameters to access to internet.
6 VOLTE, VOIP & CS Domain Voice Call
The router supports VOLTE, VOIP and CS domain voice call services. To change the call mode
select Settings > Phone and chose the desired option from the dropdown menu.