Quick Start Guide
For best results, the “Auto” setting of network mode is recommended.
Please contact your network service provider for more detailed information.
7 FAQS & Troubleshooting
If you are expecting any issues with the router, in most cases please try to restart the router or
restore the router to its factory settings.
The illustrations in this guide are for reference purpose only and may not reflect the exact
appearance of your product. Please contact your network service provider for more detailed
information.
Questions
Solutions
How to restore factory settings?
When the router is power on, click the reset
button for approximately 3 seconds using a
pointed object until the indicator starts to
blink. Restoring factory settings will clear all
customized settings.
How can I connect to the router by Wi-Fi
Protected Setup (WPS) function?
1. Ensure that WiFi is enabled on the client.
2. Press the WPS button on the router to set
up a WPS connection
How to deal with the content display issue of
the WebUI?
Manually clear browser’s cache, for example,
open your browser and choose Internet
Options >General >Browsing history >Delete,
and re-launch the WebUI page.
Why the router does not work after I have
finished configuring?
1. Ensure that you have a working standard
Sim card inserted properly.
2. Move the router to an open space free
from obstructions and make sure there
are available mobile networks.
3. If the problem persists, please contact
your network service provider.
Why can’t I access the router’s WebUI?
1. Ensure that your computer is connected
to the router through WiFi or the Ethernet
cable.
2. Ensure that your computer is set to obtain
an IP address and DNS server address
automatically.
3. Restart your browser or try using another
browser.
4. If the problem persists, restore the router
to factory settings and try to access
WebUI again.
8 Warning and Notice