Troubleshooting guide
Table Of Contents
- Maintenance Overview
- DVR Status Check and Camera Alignment – 5 Minute Test
- Adjusting the Date and Time
- Setting the Time and Date Manually
- Setting the Time and Date using GPS
- Changing Fan Filters
- Checking the DVR condition & mounting
- Connecting a Laptop to DVR via Ethernet Cable
- Connecting the DVR to the Computer
- Updating the DVR Firmware
- Reformatting Hard Drives
- Removing the Hard Drive
- Replacing the Hard Drive
- Cleaning the Dome or Wedge Camera Window
- Cleaning the DVR front cover and cable cover
- Troubleshooting Overview
Seon Maintenance and Troubleshooting Guide R004 15
Checking the DVR condition & mounting
When doing your scheduled preventative maintenance, take a moment to check the physical
condition of the DVR.
Is there any visible damage to the exterior of the unit?
Is the locking front cover locked and secure?
Is the DVR securely attached to the mounting plate and is the mounting plate fully
secured in place?
If the cables enter the cable cover through a side or rear knockout hole, is the cable
grommet fully intact to protect the cables from wear?
Cable cover
Mounting plate
Cable grommet
Locking front door
DVR
Door lock