Troubleshooting guide
Table Of Contents
- Maintenance Overview
- DVR Status Check and Camera Alignment – 5 Minute Test
- Adjusting the Date and Time
- Setting the Time and Date Manually
- Setting the Time and Date using GPS
- Changing Fan Filters
- Checking the DVR condition & mounting
- Connecting a Laptop to DVR via Ethernet Cable
- Connecting the DVR to the Computer
- Updating the DVR Firmware
- Reformatting Hard Drives
- Removing the Hard Drive
- Replacing the Hard Drive
- Cleaning the Dome or Wedge Camera Window
- Cleaning the DVR front cover and cable cover
- Troubleshooting Overview
Seon Maintenance and Troubleshooting Guide R004 30
Replacing the Hard Drive
To replace the drive:
1. Slide in a drive until the cartridge seats inside the front panel. Press in firmly with your
thumbs on both sides of the drive faceplate.
2. Insert the drive key, turn clockwise by ¼ turn until the drive lock is in the locked position.
If the drive is properly seated the key lock should move easily from 12 to 3 o’clock.
Do not try to force the locking mechanism in order to seat the drive.