Data Sheet

PBA RF Module ATM210
5GHz
Wireless Audio Transceiver
REV: 00
The hardware for the audio input (transmit) and audio output (receive) versions of the module is identical and
only the firmware loaded onto the module determines its function.
Features
 Product Size
- Module Size (mm): 40.4 (W) X 26.0 (L) X 3.2 (H)
- PCB size (mm): 40.0 (W) X 2.6.0 (L) x 1.1 (H)
- Shield can (mm): 24.7 (W) X 21.9 (L) X 2.0(H)
- Antenna Type : PCB Printed Antenna
 Audio Interfaces
- I2S Digital Input/Output interface with >93dB end-to-end digital audio path
 Frequency range : 5.15~5.25GHz, 5725-5.825 GHz, continuous dynamic frequency selection
 Low, fixed latency (14.8ms typ. for stereo)
 3Mbps OTA data rate
 Multiple OTA audio configurations
 Forward error correction coding, error detection, and audio-specific error concealment
 Auto-search/sync and dynamic channel selection
 Capability to detect and avoid wideband interferences such as 5GHz band WLAN
 Sample rate converter: Support for 32 - 96kHz input sample rates
 Dual printed PCB diversity antennas for multipath and fading migrations
 Wireless Range (typ.)
- LOS (Line of Sight) range : <110m
 Control interfaces: I2C, SPI
 Up to 9 additional GPIOs
 Customizable firmware for simple, low-cost, sub-woofer amplifier implementations
 Dual printed PCB diversity antennas for multipath and fading mitigation
 RF parts can-shield
 24pin FPC connector
 To be certified FCC/IC & CE compliance
Applications
 Wireless Subwoofers
 Stereo Wireless Rear Speakers
 Soundbar / Audio Video Receiver / Home theater system
 Mono/Stereo Audio Channel Transmission
6 /20
JUN 10,2019