Data Sheet

PBA RF Module ATM210
5GHz
Wireless Audio Transceiver
REV: 00
5. Electrical Specifications
5-1. Absolute Maximum Ratings
Absolute Maximum Ratings (AMR) are stress ratings only. AMR corresponds to the maximum value that can be applied
without leading to instantaneous or very short-term unrecoverable hard failure (destructive breakdown). Stresses beyond
those listed under AMR may cause permanent damage to the device.
Functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating
Range” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may adversely affect device
reliability.
Device functional operating limits and guaranteed performance specifications are given under Electrical Characteristics at the
test conditions specified.
CONDITION MIN MAX
+5V Supply Voltage Input -0.3V 6.0V
Input Voltage Range – Digital Inputs -0.3V 3.6V
Input Voltage Range – Analog Inputs -0.3V 3.6V
Operating Temperature -40ºC +85ºC
Storage Temperature -40ºC +85ºC
Static Discharge Voltage* TBD TBD
Notes;
* System level ESD : IEC 61000-4-2; C = 150pF, R = 330
Ω
5-2. Recommended operating Range
PARAMETER MIN TYP MAX UNIT
VDD, +5V Supply pin voltage 4.5 5.0 5.5 V
Ambient Temperature (TA) 0 60 ºC
RESET pin hold time 10 ms
Power Supply Rise Time (to 3.0V) 0 10 ms
5-3. Electrical Characteristics – DC
Typical specifications at TA = 25°C, VDD = 5.0V
PARAMETER CONDITION MIN TYP MAX UNIT
Supply Current (IVDDA)
Shutdown (chip disabled) 1 uA
Standby (also USB suspend) TBD mA
7 /20
JUN 10,2019