Data Sheet

PBA RF Module ATM210
5GHz
Wireless Audio Transceiver
REV: 00
5-5. Electrical Characteristics – RF RX
Operating Conditions: VDD = 4.5 to 5.5V, TA = 0°C to +60 °C, RF Freq = 5725-5825MHz, measured to the RF conducted
2 ports. Typical specifications at TA = 25°C, VDD = 5.0V
PARAMETER CONDITION MIN TYP MAX UNIT
RF Channel Frequency Range
Low band 5150 5250
MHz
High band 5725 5825
RX Sensitivity*
SSC (Single Sub-Carrier) -89
dBm
DSC (Dual Sub-Carrier) -86
Max input signal
LNA = low gain mode, min IF
gain
-5
Out-of-band blocker level
<5150 MHz, >5850 MHz
-45
2400-2483.5 MHz
-20
Spurious RF outputs
5150-5850 MHz
TBD
<5150 MHz, >5850 MHz
TBD dBm
RF I/O Impedance ANT0, ANT1 50 ohm
* The sensitivity been defined with BER <= 0.002.
5-6. Electrical Characteristics – RF PLL
Operating Conditions: VDD = 4.5 to 5.5V, TA = 0°C to +60 °C, RF Freq = 5725-5825MHz, measured relative to the RF
balun single-ended I/O. Typical specifications at TA = 25°C, VDD = 5.0V
PARAMETER CONDITION MIN TYP MAX UNIT
RF Channel Frequency Range
Low band 5150 5250
MHz
High band 5725 5825
RF Channel frequency
resolution (raster)
1 MHz
Local Frequency error 5 10 ppm
Crystal Oscillator Frequency External crystal 16 MHz
RF I/O Impedance ANT0, ANT1 50 ohm
5-7. Electrical Characteristics – Audio C/CS
PARAMETER CONDITION MIN TYP MAX UNIT
Frequency Response (-3dB)
16bit audio, 11KSps
over-the-air sample rate
20 5K Hz
9 /20
JUN 10,2019