User's Manual
15
3.1 Windows 98/ME Setup
- When IP Address, Gateway, DNS Configuration setups are completed, click on ‘OK’ to close the TCP/IP
Properties dialog box. When “Network” window is displayed, click ‘OK’ again.
- In case of Windows 98, the system restarts automatically when network related setup is changed.
When the ‘Change System Setup’ screen pops up, click ‘Yes’ to restart Windows.
<Confirm System Restarting>
<Run winipcfg >
- When the PC is restarted, VoIP CPE assigns the IP address automatically.
For automatic assignment, PC and VoIP CPE should be connected by LAN cable.
If cable is not connected, connect a cable and then restart the PC.
- For automatic assignment of IP address, you can check it by using winipcfg program.
Click the Windows Start button, and then select Run menu and enter “winipcfg” in the
Open box, and click on ‘OK’ button.