User's Manual

3.1 Windows 98/ME Setup

Select LAN card adapter used by connecting the router from the winipcfg IP Configuration window (Select NDIS

5.0 or the appropriate LAN card. Do not select PPP adapter) to check if the IP address of your PC is assigned to

the value between 192.168.1.10 and 192.168.1.150 automatically. If you cannot see other LAN card than PPP

adapter being used, you have to reinstall a LAN card driver. (Select LAN Card, click “Disconnect” and then “All

Create” or “All Update” button to check IP assignment.)

[Note] All PCs connected to VoIP CPE will get each of assigned IP addresses respectively.

00-52-00-01-19-A2

192.168.1.10

255.255.255.0

192.168.1.1

Select

Select LAN Card: Select NDIS 5.0 or the appropriate LAN card

Adapter Address: Different values on each adapter, ignorable

IP Address: 192.168.1.100 ~ 192.168.1.150

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.1

[Note] If the IP address of PC is not assigned automatically, check the following and restart PC to check if the IP

address is assigned.

- Connect a LAN cable between PC and VoIP CPE

- Check TCP/IP setup details

To use Internet after completion of PC setup, refer to Chapter IV and set the WAN port of VoIP CPE to connect to

the Internet. Since Internet connection setup is made by VoIP CPE, you don’t need to set up in all PCs but do just

once.

< Check IP Address >