User's Manual

3.2 Windows 2000 Setup

This procedure is to restore Windows 2000’s TCP/IP setup to default values. If Windows is not

installed for the first time in PC or Internet is not operated properly, check all values are normal

according to the following.

After completing the TCP/IP setup of PC, to check if IP address is obtained from VoIP CPE

automatically, connect PC and VoIP CPE with a LAN cable according to the instructions of

Chapter II and keep VoIP CPE turned on before Windows setting up. Click on the Windows Start

button, select Settings >> Control Panel on the menu and then double-click the “Network

Connections” icon.

<Double-click the Local Area Connection >

- Click Properties from the Local Area Connection window.

- Double-click Internet Protocol (TCP/IP) from the Properties window.