User's Manual

3.3 Windows XP Setup

This procedure is to restore Windows XP’s TCP/IP setup to default values. If Windows is installed

for the first time in PC, there is no change and check all values are normal according to the

following.

After completing the TCP/IP setup of PC, to check if IP address is obtained from VoIP CPE

automatically, connect PC and VoIP CPE with a LAN cable according to the instructions of Chapter 2

and keep VoIP CPE turned on before Windows setting up.

- Click on the Windows Start button, select Settings >> Control Panel on the menu.

- Double-click the “Network Connection” icon on the Control Panel.

<Double-click the Network and Internet Connections > …

<Double-click the Network Connection>