User's Manual
30
7. VoIP CPE LAN Setup
This screen is to perform all kinds of setup related internal LAN.
First of all, you can assign the IP address of gateway and subnet mask to be used in the LAN that
VoIP CPE manages. If you use the system by linking with external router, some cases may need
setup change, otherwise you can use default value.
The following describes setting up whether or not to use DHCP and detailed information.
By using DHCP, you can decide whether or not to give the IP address automatically to each PC
connected to VoIP CPE, and additionally set up the expiration date of IP address, DNS Relay(you
have to set the DNS in the IP Address tap of WiMax part(5.1 IP Address Setup)), the range of IP
address, and IP address of WINS Server.
7.1 DHCP Server Setup