User Manual

Configuration
How to check your IP address
• To run the Command Prompt, click the Start button at the lower left corner of the
Windows screen. Click Run, then enter “cmd” in the Open box, and click OK.
• When the Command Prompt window opens, enter the “ipconfig” command to verify the
IP address, Subnet mask, and Gateway, which are automatically assigned to PC.
<Run cmd>
[Note] All PCs connected to CPE will receive their own assigned IP address.
[Note]
If
an
IP
address
is
not
assigned
check
the
following
and
then
restart
the
PC
and
<Verify IP address>
10
[Note]
If
an
IP
address
is
not
assigned
,
check
the
following
,
and
then
restart
the
PC
and
check whether an IP address is assigned.
 LAN cable connection between PC and CPE
 Check TCP/IP setup details