User Manual

CPE Setup on the web page

• This will take several minutes, and time will vary according to the environment.

• In some case, a pop-up window asking to rebuild the system will be opened due to a

version difference. If this occurs, click “Yes” to rebuild the system.

• CPE is rebooted automatically after the upgrade process is complete.

[Caution] To avoid failure of the CPE, do not power off the CPE during the upgrading

process.

Admin (Reboot/Default Setting)

• Select “Admin” → “Reboot/Default Setting” from the menu.

• Select “Reboot” to reboot the CPE.

• Select “Reset to all default settings” to reboot the CPE and initialize CPE configuration.

• To reboot the CPE, click “Apply”.

• The CPE is rebooted automatically. This takes about 40 seconds.