User Manual

Introduction to the Product
This product receives external WiMAX signals to construct in-building infrastructure on a
WiMAX network, and is covered by Ethernet network internally. The product serves as a
relay as well as an internet router.
However, the purpose of the product is mostly to supply signals to users, with the
emphasis being its relay rather than its modem functions.
It is also a wired and wireless internet router that enables several systems to share a
single internet address supplied by a high-speed internet service provider.
Functional
Features
Function Features
IEEE802.16e WiMAX
Support
Wave1 = DL : 10Mbps / UL : 4Mbps
Wave2 = DL : 30Mbps / UL : 6Mbps
IEEE802.3u Ethernet Support 10/100Mbps wired LAN connectable
RJ
11 VoIP Support
1xRJ
11 for Analog Telephone Service
Functional
Features
RJ
-
11
VoIP
Support
1
x
RJ
-
11
for
Analog
Telephone
Service
LAN Port 1 Port 10/100Mbps Ethernet Switch built-in
Cable Auto Sense Straight (Direct) or Cross Cable auto sensing
NAT function
Supports up to 253 wired and wireless connections and internet
router*
Firewall function Manages basic firewall and IP/Port/based access
LED Information
LED Indicator Function
PWR Power Supply status (On at Power ON)
LAN ON when connected to PC, Flashing at communication
3
PHONE ON when connected to Telephone, Flashing at communication
RSSI
Representation WiMAX received signal strength indication(RSSI), on when
the mode was selected router.