User Manual

Configuration
Network Configuration
To
verify
the
normal
operation
of
the
router
check
the
following
LEDs
after
connecting
the
Telephone
To
verify
the
normal
operation
of
the
router
,
check
the
following
LEDs
after
connecting
the
router, modem, and PC with a LAN cable, as follows:
LED Normal Operation Actions to take if not illuminated
PWR ON when connecting adapter Check for adapter power failure
LAN
ON when cable is connected
Check cable connection and PC power supply
LAN
normally
Check
cable
connection
and
PC
power
supply
PHONE
On when Phone cable is connected
normally
Check cable connection and Telephone
WiMAX
RSSI
Represents WiMAX received signal
strength indication (RSSI), ON when
in router mode
Check that router mode is selected
If one or more LED lights is not in “normal operation”, take the actions specified in the
table.
Install a router after connecting to the network.
If normal connection between router and PC is checked, you have to set up the PC and
router.
PC setup is to control network configuration for Windows 98, Windows 2000, or Windows
XP to use the Internet while the PC is connected to a router.
5
Route
r
setup is to connect a route
r
to the Internet. Please refe
r
to the CPE Setup chapte
r
.