User's Manual

3. PC Configuration

This chapter describes how to set up PC network environment by connecting to MULTI USER CPE

according to Windows operating system.

To use Internet under operating system such as Windows, the protocol called ‘TCP/IP’ is required.

For normal use of MULTI USER CPE, you have to set up the TCP/IP protocol normally.

In general, the condition Windows is installed first in PC is the condition router can be used, in which no

separate TCP/IP setup is required.

As a computer used in ADSL service environment may have problem in the router environment if ADSL

access program (PPPoE access program) is installed, delete this and then set the network environment

according to the instructions of this chapter.

- In case of Windows 98/ME/2000, delete the ADSL access program installed separately

- In case of Window XP, delete the broadband connection installed

In case of the computer used in the internet service environment of LAN mode, VDSL mode, IP-ADSL mode,

and cable modem mode, you can directly connect it to a router to use without changing the Windows

configuration separately.