User's Manual

3.2 Windows 2000 Setup

IP Address: 192.168.1.10~60

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.1

[Note] If IP address is not assigned normally, check the following and restart PC so as to check if the IP

address is assigned.

- LAN cable connection between PC and MULTI USER CPE

- Check TCP/IP setup details

- Whether or not to remove ADSL access program

To use Internet after completion of PC setup, refer to Chapter IV and set the WAN port of MULTI USER CPE

to connect to the Internet. Since Internet connection setup is made by router, you don’t need to set up in all

PCs but do just once.