User's Manual

22
3.3 Windows XP Setup
This procedure is to restore Windows XP’s TCP/IP setup to default values. If Windows is installed
for the first time in PC, there is no change and check all values are normal according to the
following.
After completing the TCP/IP setup of PC, to check if IP address is obtained from MULTI USER CPE
automatically, connect PC and MULTI USER CPE with a LAN cable according to the instructions of
Chapter 2 and keep MULTI USER CPE turned on before Windows setting up.
- Click on the Windows Start button, select Settings >> Control Panel on the menu.
- Double-click the “Network Connection” icon on the Control Panel.
<Double-click the Network and Internet Connections > …
<Double-click the Network Connection>