User's Manual

3.3 Windows XP Setup

<Select the

‘Obtain an IP address automatically’ ,

‘Obtain a DNS Server address automatically’ and

click OK>

- Double-click Internet Protocol (TCP/IP) and then select the Obtain an IP address automatically and

Obtain a DNS Server address automatically.

<Double-click TCP/IP >

- After completion of setup, click OK button and close all of Local Area Connection Properties windows.

- When TCP/IP setup is completed, IP address is automatically assigned by MULTI USER CPE. For

automatic assignment, PC and MULTI USER CPE should be connected with a LAN cable. If it is not

connected with a cable, connect the cable and restart the PC.

- You can check the automatic IP address assignment by using the ipconfig command from Command

Prompt.