User manual

As per 06/2016
10
Switch on product
Before switching on, check the product for visible damage and ensure that the protective
equipment is functioning correctly. In case of damage, do not switch on the product.
Check the airflow and ensure that there are no foreign objects. Remove them if necessary.
Apply the nominal voltage to supply the product. Start the product after changing the input
signal.
Switch off product
Switch off the product via the control input (if existing).
Disconnect the product from the voltage supply.
5. Faults
Do not repair your product, replace it by a new one.
Electrical voltage at motor
Wait five minutes after the voltage has been switched off (all poles)
before opening the product.
DANGER
!