Datasheet
MATERIAL SAFETY DATA SHEET
Dissipator
746 02/2010
Page 2 of 4
4. FIRST AID MEASURES
Ingestion:
Do not induce vomiting. Keep individual calm. Obtain medical attention.
Inhalation:
Remove to fresh air. If symptoms develop and persist, get medical attention.
Skin Contact:
Wash with soap and water. Remove contaminated clothing and shoes. Wash
clothing before reuse. Get medical attention if symptoms occur.
Eye Contact:
Flush with copious amounts of water, preferably, lukewarm water for at least
15 minutes, holding eyelids open all the time. Get medical attention.
5. FIRE FIGHTING MEASURES
Flash Point (TCC):
> 200ºF
Recommended Extinguishing Agents:
Carbon dioxide, foam, dry chemical
Special Firefighting Procedures:
Wear self contained breathing apparatus
Hazardous Combustion Products:
Oxides of carbon. Oxides of nitrogen. Irritating organic vapors.
Unusual Fire or Explosion Hazards:
None
Flammable/Explosive Limits – lower %:
Not available
Flammable/Explosive Limits – upper %:
Not available
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Wear proper protective equipment
Measures for Environmental Protection:
Do not allow entry into drains or surface waters
Clean-up Measures:
Soak up with an inert absorbent. Store in partly filled, closed container until
disposal.
7. HANDLING AND STORAGE
Handling:
Avoid contact with eyes, skin and clothing. Avoid breathing vapor and mist.
Wash thoroughly after handling. Use only with adequate ventilation.
Storage:
Store between 46º and 82ºF unless otherwise labeled to preserve shelf life.
8. EXPOSURE CONTROLS, PERSONAL PROTECTION
Eye/Face Protection:
Safety glasses or goggles with side shields
Skin Protection:
Use rubber or plastic gloves, and protective clothing as necessary
Respiratory Protection:
Use NIOSH approved respirator if there is a potential to exceed exposure
limits
Engineering Controls:
Forced ventilation may be required if concentrations exceed exposure limits