User's Guide
Table Of Contents
Fitting a microSD card
Your radio supports microSDHC 32 GB cards that must be formatted for the FAT16 file system.
1. Lift the cover using a small screw driver or tweezers.
2. Carefully lift the metal retainer and insert the card as shown.
NOTE: Use care when opening/closing the metal card retainer. If it becomes
detached, it can be clipped back into place.
3. Carefully close the metal retainer.
4. Close the cover. Using your thumbs, press downward firmly on either side of the cover as
shown to secure each tab. You must ensure that the compartment cover is secured. Not
securing the cover will affect your radio's IP rating.
16 SC20 Series hand-portable radio