Quick Start Guide

Quick Start Guide
39
Features
Your radio can be customised for various advanced features and can
have various soft keys assigned to frequently used features.
Connector Protector
When working in salt water environments or in an area with high salt-
laden humidity such as sea mist or fog, enabling the Connector Protector
feature will protect the Digital Accessory connector (sDAC) from potential
corrosive damage when an accessory is not attached.
Note: A cover must be fitted to the Rugged Accessory Connector
(RAC) (on the side of the radio) if an accessory is not attached.
To enable Connector Protector:
1. Press Menu then select Options > Settings > Connector Protector.
2. To toggle protection on/off press the Toggle context key. When the CP
Enable check box is ticked, Connector Protector is enabled, and when
the check box is empty it is disabled.
If Connector Protector is enabled ( ) when the radio is powered off, it
will remain enabled when the radio is next powered on unless the radio
is in a charger or car kit or if a data accessory is attached when the radio
is powered on, in which case Connection Protector is disabled ( ) until
the radio is removed from the charger, car kit or data accessory. In these
circumstances it is not necessary to re-enable Connector Protector.
User profiles
User profiles are pre-set combinations of alerts and settings on your radio.
They allow you to switch settings easily to match your circumstances or
environment. An icon showing the number of the profile selected,
appears on the status line or the Shortcut Bar. Up to ten pre-defined user