User's Guide

Make a Smart Call
1. Open the Smart Call menu either of the following:
Press a preconfigured soft key.
Use the Speech Call Settings menu (see Speech call settings below.
2. Select mode Smart Call A or Smart Call B.
Your radio goes into Smart Call Mode. The tri-colour LED flashes amber and the active Smart
Call folder is displayed.
3. Select the required talkgroup in the current Smart Group Folder by .
4. Use the PTT (or press the Select context key or the Select/Send key) to transmit to the
chosen talkgroup.
To leave Smart Call Mode
1. Open the Smart Call menu either of the following:
Press a preconfigured soft key.
Use the Speech Call Settings menu (see Speech call settings below.
2.
Select Group or Individual:
Group—returns you to your previous talkgroup
Individual—allow you to make an individual call by dialling
Speech call settings
The Speech Call Settings option is not available if your radio is in Transmit Inhibit on page77.
1. Select Menu > Groups > Speech Call Settings.
2. Select one of the options.
Modifying your call setup
Under certain circumstances, the type of a call which is being initiated by your radio may be modified
by the network or by the recipient of the call. For example, you might make a group call, but the actual
call being established might be converted to an individual call to a dispatcher.
This feature is typically used by network administrators to provide centralised control over certain
services (e.g. customising all the radios so that Alarm Calls are all the same type and destination,
allowing the network to decide what type of call is made and the destination whenever an Alarm Call
is initiated).
When your call is modified you are alerted with specific visual and acoustic alert indications, to make
you aware that a new type of call is being connected. The call continues as per any normal call of the
new type, and the icons and information elements displayed inform you about the type of the ongoing
call.
User Guide 63