User's Guide

1. Select Menu > Groups > Folders > Favourites.
2. Press Options, then select Open.
3. Navigate to the New Group option then press Options.
4. Press Insert.
5. Select the talkgroup you want to add (from any folder).
6. Press Select to insert the talkgroup into the Favourites folder.
If the New Group option is not available, you do not have 'edit' permissions on the Favourites folder.
The Favourites folder must be set to 'Edit' at customisation.
Quick Groups
You can quickly change to a different talkgroup by pressing a customised Quick Group soft key
specified for that talkgroup.
To select the Quick Group talkgroup
Press the customised Quick Group soft key. Alternatively, view the Quick Group using the menu
then press Select.
To view your Quick Groups
You can view the talkgroups and folders associated with your assigned Quick Groups.
1. Select Menu > Groups > Quick Groups.
2. Use the Up and Down navigation keys to highlight a Quick Group then press Select.
To change the talkgroup associated with a Quick Group
Your radio can be customised to allow you to change the talkgroup associated with a Quick Group.
These changes may be overwritten when your radio is reprogrammed.
Select and view a Quick Group (described in To view your Quick Groups above) then:
Select Options > Change > Current.
Your current talkgroup is now associated with the selected Quick Group.
User Defined Scan Lists
A User Defined Scan List (UDSL) is a list of talkgroups which are either fixed, or user-definable. Any
talkgroups in the UDSL that are invalid for the current network are disabled and are shown ‘greyed
out’ in the talkgroup list.
Until a UDSL is selected the talkgroups it contains are not scanned and your radio cannot receive
calls from them. Your radio can have a maximum of 20 UDSLs, and up to 10 talkgroups can reside
within each UDSL.
If you select a UDSL (in the same way as you select a talkgroup):
42 SC21 Series hand-portable radio