Terms and Conditions

A data/programming cable, with either an RS232 (D-type) connector or a USB
connector, is available from Sepura for customising a single radio.
1. Connect the USBprogramming cable to the computer.
2.
Connect the cable to the radio by inserting the hook on the connector into
the slot as shown.
3.
Secure the cable in position. Do not over tighten.
4. When programming is complete disconnect the cable from the radio.
Revert radio settings to customisation settings
Users have the ability to add personal data to the radio, such as adding
contacts to the phonebook, changing the talkgroups and sending and
receiving SDS/Status messages. Such changes may be undesirable on fleet
radios that have been specifically customised for fleet users—where radios are
not personal processions. Using the Revert All Changes option, the radio
settings can be reset back to the last customisation settings.
There is also a Revert Non-Personal Changes option that allows users to reset
the radio settings back to the last customisation, but keep their personal
changes to the phonebook, talkgroups and messages.
User Guide
145