Terms and Conditions

Change Network
If your radio is customised to use other networks, you can manually select a
network from a list of configured networks, or allow your radio to
automatically use a suitable network when you move into its coverage area.
Note: If your radio is customises for End to End Encryption, the radio
may change the End-to-End Encryption status when the selected network
is changed. It may also provide a selection of talkgroups on other
networks. If a talkgroup is selected that does not belong to the current
network, your radio will change network accordingly.
Note: After switching to a different network, make sure that your selected
talkgroup is valid for that network. For details of talkgroup selection see
Talkgroups and folders on page43.
Tip: Your radio can be configured to display the Network Name
continuously on the Radio Status Line (RSL), subject to space, when it is
idle.
Tip: If your radio registers on a Visited Network network the Migrated
icon is displayed in the Radio Status Line (RSL).
To manually change network
1. Select Menu > Networks > Change Network.
2. Navigate to the required network then press Select or the Select/Send key.
Note: When you manually select a network it remains selected regardless
of whether your radio is able to obtain service on that network.
To automatically change network
1. Select Menu > Networks > Change Network.
2. Navigate to Automatic then press Select or the Select/Send key.
The Network Name of the automatically selected network is displayed below
the Automatic option in the list when the radio is able to obtain service.
90
SC21 Series – 07/2017