User's Manual

10 DMR Mobile Radio SBM8000, SCM8000, SEM8000
Accessory information
Sepura supply a range of accessories for this product. Contact
your service provider or visit the Sepura website for a full list of
accessories suitable for use with this product.
Fist microphone
Your radio is equipped with a standard fist microphone
designed for close-talk radio communications.
Attach the microphone heavy-duty connector to the
Microphone/ programming cable interface connector on the
radio.
Always hold the microphone firmly in your hand with the
microphone facing towards you and in an upright position.
Hold the microphone approximately 5 cm (2 in.) away from
your mouth when speaking.
To talk, press the PTT button during the call hang time period
(when the LED is solid orange) and talk clearly into the
microphone. Release the PTT button when you have finished
talking.
Never hold or swing the microphone by the heavy-duty coiled
lead.
Note that your radio can also be used with an optional keypad
fist microphone (part no. 300-01064). This microphone supports
the one touch button feature that lets you make a group or
private call to a predefined alias or ID by pressing one of the
predefined numerical keys (1 to 9). It can also be used to
manually dial a contact.
Always secure your microphone using the mounting clip when
not in use.
Basic operation
Power On/Off
To power on, press and hold the Power button.
To power off the radio, press and hold the Power button.
Adjusting the volume
Rotate the Volume control knob clockwise to increase the
volume.
Rotate the Volume control knob counter-clockwise to decrease
the volume.
Selecting a Channel
Your service provider may program the radio with either a
contact group or person. Each channel can be configured as
either an analogue or digital channel. Note that some functions,
such as messages, are not available on analogue channels.
Press the up/down navigation keys to select a channel.
To change the channel, rotate the Channel Selector knob.
Making a PTT call
Your radio may already be programmed with either a contact
group or a person on each channel by your service provider. The
contact group or person can be programmed as a private call,
group call or an All Call.
Call to the default contact group or person
A contact person or group may be added as a default contact.
The default contact is called when you press the PTT button.
You may need to select the channel before making the call. In
the Home display, press the PTT button to initiate a call.