User's Manual

DMR Portable SBP8000, SCP8000, SEP8000
6
Connectors, controls, buttons and keys
Refer to the illustration for the location of the following
connectors, controls, buttons and keys:
(1) Antenna
(2) Programmable side button1
(3) PTT button
(4) Programmable side button 2
(5) Emergency/Programmable button
(6) LCD display
(7) Left context key
(8) Left navigation button
(9) Dial key
(10) Speaker
(11) Keypad
(12) Channel selector knob
(13) Power/volume knob
(14) LED status indicator
(15) Microphone
(16) Up navigation key
(17) Right context key
(18) Right navigation button
(19) Cancel/Home key
(20) Down navigation key
(21) Rugged access connector (RAC)
(22) Belt clip (optional)
(23) RAC cover (screw fixing)
(24) Battery
(25) Battery latch
Keys, buttons and knobs overview
Power/volume knob
Rotate clockwise to switch the terminal on. Rotate counter-
clockwise to switch the terminal off.
Continue rotating the knob clockwise to increase the volume.
Rotate counter-clockwise to decrease the volume.
Context keys
Press to select the option displayed above the left or right
context key.
Emergency/Programmable button
Press and hold button to activate an Emergency alert. Your
Service Provider may program this button for an alternative
function or disable the emergency alert.
Channel selector knob
Rotate clockwise to change channels. Your Service Provider
may program your terminal with up to 16 channels.
Navigate left, right, up and down buttons
Your terminal has four navigational buttons in the centre of the
keypad. Use these buttons to navigate through the menus and
select options.
Cancel/Home key
Ends a call or returns to the Home display.