sepura TETRA Terminals Product Guide MOD-10-1164 Issue 15 © SEPURA PLC 2014
sepura MOD-10-1164 Contents CONVENTIONS _______________________________________________ 3 REGULATORY STATEMENTS ___________________________________ 4 Compliance with Standards _________________________________________________ 4 North American and Canadian markets ________________________________________ 5 Marchés nord-américain et canadien __________________________________________ 6 OPERATIONAL REQUIREMENTS ________________________________ 9 Operating Conditions _________________________________________
sepura MOD-10-1164 CONVENTIONS This guide uses the following formatting and graphical conventions. Convention Description Note icon. Emphasises related, reinforcing, or important information. Tip icon. Suggests alternative methods for accomplishing tasks or procedures. Caution icon. Indicates actions or processes that require caution from the user.
sepura MOD-10-1164 REGULATORY STATEMENTS COMPLIANCE WITH STANDARDS RADIATION PROTECTION The radios fully comply with the NRPB specification EN50360 (EN50361) and the ICNIRP guidelines for exposure to electromagnetic fields mandated for mobile phones (2W per kg over a 10g sample).
sepura MOD-10-1164 RADIO OPERATION The radios meet the requirements specified by the ETSI specification EN 300 394-1. SAFETY AND VEHICLE CERTIFICATION AGENCY (VCA) The radios fully comply with the User Safety specification EN60950, and the Automotive Directive detailed in 2006/28/EC. NORTH AMERICAN AND CANADIAN MARKETS The following regulatory statements apply to users in the North American and/or Canadian markets.
sepura MOD-10-1164 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (FCC Rule Part 15.19(a)(3)). NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
sepura MOD-10-1164 l’équipement est exploité dans un environnement commercial. Cet équipement génère, utilise et peut émettre de l’énergie de radiofréquence et, s’il n’est pas installé et utilisé conformément au manuel d’instruction, il peut provoquer des interférences nuisibles pour les communications radio.
sepura MOD-10-1164 Cet appareil numérique de la Classe A est conforme à la norme ICES-003 du Canada. Pour réduire les interférences radio potentielles pour les autres utilisateurs, le type d’antenne et son gain doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas les valeurs nécessaires à une communication efficace.
sepura MOD-10-1164 OPERATIONAL REQUIREMENTS All features and functions of Sepura radios are subject to network support of the TETRA Interoperability Specifications. OPERATING CONDITIONS Sepura radios operate in a temperature range between -20ºC and 60ºC and a maximum humidity of 98%. They may be safely stored at a temperature within the range -40ºC to 85ºC. The minimum and maximum temperatures for operation are -30°C to +70°C.
sepura MOD-10-1164 HANDHELD RADIO RANGE STP Series Radios SRH3000 Series Radios TETRA Terminals Product Guide Page 10 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 STP SERIES RADIOS STP9000 AND STP8000 FRONT Antenna Emergency Key Navi-knob™ Blue LED Tri-colour LED Duplex Earpiece and Half-Duplex Microphone Mode Key Programmable Soft Key Soft Key (Default is Missed Event Key) Rugged Accessory Connector PTT Left Context Key Right Context Key Navigation Keys Cancel / Home Key Select / Send Key Duplex Microphone Alphanumeric Keypad (with Half-Duplex speaker behind) Facility Connector TETRA Terminals Product Guide Page 11 of 47 Issue 15 © S
sepura MOD-10-1164 STP9100 AND STP8100 FRONT Emergency Key Antenna Navi-knob™ Blue LED Tri-colour LED Duplex Earpiece and Half-Duplex Microphone Mode Key Programmable Soft Key Soft Key (Default is Missed Event Key) PTT Rugged Accessory -Connector Left Context Key Right Context Key Navigation Keys Cancel / Home Key Select / Send Key Duplex Microphone Half-Duplex speaker Facility Connector TETRA Terminals Product Guide Page 12 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 STP9200 AND STP8200 FRONT Antenna Navi-knob™ Emergency Key Blue LED - Tri-colour LED Mode Key Duplex Earpiece and Half-Duplex Microphone Programmable Soft Key - Soft Key PTT Rugged Accessory Connector Soft Key Soft Key Navigation Keys Cancel / Home Key Select / Send Key Soft Keys Duplex Microphone Half-Duplex speaker Facility Connector TETRA Terminals Product Guide Page 13 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 STP8X000 FRONT Antenna Navi-knob™ Emergency Key Blue LED Tri-colour LED Mode Key Duplex Earpiece and Half-Duplex Microphone Programmable Soft Key - Key Soft (Default is Missed Event Key) PTT Rugged Side Connector (with cover) Left Context Key Right Context key Navigation Keys Cancel / Home Key Select / Send Key Alphanumeric keypad (with Half-Duplex speaker behind) TETRA Terminals Product Guide Duplex Microphone Page 14 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 STP8X100 FRONT Antenna Navi-knob™ Emergency Key Tri-colour LED Blue -LED Mode Key Duplex Earpiece and Half-Duplex Microphone Programmable Soft Key Soft Key (Default is Missed Event Key) PTT Rugged Side Connector (with cover) Left Context Key Right Context Key Navigation Keys Cancel / Home Key Select / Send Key Duplex Microphone Half-Duplex speaker Soft Keys TETRA Terminals Product Guide Page 15 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 STP9000 AND STP8000 SERIES REAR Space for User identity label Antenna Programmable Key Antenna Connection (shown with cover) Soft RFID and IP67 indication (STP9000 Series only) PTT Carrying aid attachment point Battery Battery release clip TETRA Terminals Product Guide Page 16 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 STP8X SERIES REAR Antenna Space for User identity label Programmable Soft key Carrying Aid attachment point PTT Battery Battery Charger Connectors Press to release battery here To ensure optimal performance from your radio during half duplex calls (individual or group) please hold the radio vertically, with the half duplex microphone situated approximately 5cm away from the mouth.
sepura MOD-10-1164 STP9000 SERIES AND STP8X SERIES REAR WITH BATTERY REMOVED STP8000 SERIES REAR WITH BATTERY REMOVED Pull here to open Unscrew here to open SIM Card holder/Micro SD card cover (closed) The SIM Card holder/Micro SD card cover in the STP8000, STP8100 and STP8200 is opened by pulling the flap, and in the STP9000 Series and STP8X Series radios a small PH00 jewellers screwdriver is needed to remove the screw.
sepura MOD-10-1164 For STP8X series radios the SIM card or Micro SD card must not be removed or fitted while in a hazardous environment because this would require removal or fitting of the battery in a hazardous environment which would compromise the safety ratings. In STP8000, STP8100 and STP8200 radios the SIM Card holder/Micro SD card cover should be left open while in storage and latched closed under normal use. The STP9200 and STP8200 radios do not support a Micro SD card.
sepura MOD-10-1164 STP9000 AND STP8000 SERIES RUGGED ACCESSORY CONNECTOR RSM, (which if fitted should be used at a minimum distance of 25mm from the mouth) Personal audio accessories, Headsets STP8X SERIES RUGGED SIDE CONNECTOR (RUSC) For STP8X Series radios Sepura approved ATEX/IECEx Accessories must be used. The radio must not be operated unless an accessory is attached or the RuSC Cover is screwed in place.
sepura MOD-10-1164 BATTERIES STP9000 AND STP8000 SERIES BATTERIES STP8X SERIES BATTERY Battery Charger Connectors Sprung lugs Space for user identity label Catch Press to release Battery STP9000 AND STP8000 SERIES BATTERIES Fitting and Removing the Battery Before fitting a battery please ensure that the SIM Card holder/Micro SD card cover is latched shut. To fit, unpack the battery and slot it into the rear of the radio. Push the battery down until the catch clips into the bottom of the case.
sepura MOD-10-1164 ineffective and the pack may overheat. To minimise the chance of this causing further damage, Lithium polymer battery chargers should be used in well ventilated areas away from combustible material. For example, charging of a TETRA battery, mobile phone battery or laptop battery should not be carried out with the battery and charger very near to curtains, soft furnishings, paper or other combustible material. 2.
sepura MOD-10-1164 Battery Charging For STP8X series radios: The battery must not be charged in a hazardous environment. Do not use the charger in a hazardous environment. New battery packs must be fully charged before they are used. The battery must only be charged using Sepura plc approved battery chargers. If an attempt is made to use a nonapproved battery charger the ATEX/IECEx safety rating will be invalidated and the radio will switch off. This may also invalidate the users‟ insurance.
sepura MOD-10-1164 The battery includes circuitry to protect against damage caused by accidental shorting of the contacts. Once the battery has protected itself, it will not operate again reliably until it has been removed from the radio and been fully re-charged. If the battery is not fully re-charged the battery meter and time-to-charge indication on the radio may give an inaccurate reading.
sepura MOD-10-1164 STP SERIES BELT CLIP AND “KLICK FAST” STUD “KLICK FAST” STUD BELT CLIP STP8X Series The Belt Clip and “Klick Fast” Stud which are used with the STP8X Series radios are different from those in the photos in this section. However they are attached and removed in the same way as described for the STP8000 and STP9000 Series radios.
sepura MOD-10-1164 The Belt Clip Spring Attaching the Belt Clip to the radio To attach the belt clip to the radio slide it into the carrying aid attachment recess as shown. Detaching the Belt Clip from the Radio To remove the belt clip from the radio first carefully pull or lift the bottom end of the belt clip away from the radio.
sepura MOD-10-1164 Use your thumb or thumb nail to compress the spring and release the belt clip. It is then possible to pull the belt clip so that it slides out of the carrying aid attachment recess. The “Klick Fast” Stud The “Klick Fast” Stud may be attached to the radio in the same way as the belt clip and detached in a similar way by compressing the spring (which may be plastic) with the thumb or thumb nail.
sepura MOD-10-1164 SRH3500, SRH3800, SRH3900 FRONT Antenna Navi-knob™ Emergency Key Tri-Colour LED Mode Key PTT Duplex Earpiece and Half-Duplex Microphone Navigation Keys Cancel/Home Key Select/Send Key Alphanumeric Keypad Duplex Microphone Facility connector TETRA Terminals Product Guide Page 28 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 REAR Half duplex loudspeaker Antenna User identity label recess Carrying aids mounting points Audio Accessories Socket Battery Battery release clip TETRA Terminals Product Guide Page 29 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 FACILITY CONNECTOR PEI, Car adapter, Charger connection, RSM connector ACCESSORIES SOCKET Audio Accessories socket BATTERIES Fitting and Removing the Battery To fit, unpack the battery and slot it into the rear of the hand-held. Push the battery down until the catch clips into the bottom of the case. The battery is fully secure when this catch has clipped into position. To remove, push the catch upward towards the top of the hand-held.
sepura MOD-10-1164 Battery Charging The battery should only be charged with Sepura plc approved battery chargers. Failure to use an approved battery charger will invalidate the warranty of the battery and the hand-held. A range of battery chargers is available that allow the battery to be charged while fitted to, or removed from, the hand-held (depending upon the charger model and hand-held type selected).
sepura MOD-10-1164 2. Copy batteries are available for many products, particularly mobile phones and more recently TETRA radios, including those made by Sepura. These may be cheaper than approved batteries, but may not include protection features used in the approved battery, so may be less safe and should not be used. 3. Use only Sepura approved chargers for charging Sepura products.
sepura MOD-10-1164 MOBILE / GATEWAY RADIO RANGE SRG3000 Series Transceivers SRG3000 Series Consoles Applications Interface Unit TETRA Terminals Product Guide Page 33 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 SRG3000 MOBILE / GATEWAY TRANSCEIVER GPS Antenna Connector Console Ports or Dual PEI Ports Power, audio and external control lines Antenna Connector The finish on the SRG3000 transceivers may vary.
sepura MOD-10-1164 STANDARD CONSOLE Tri-Colour LED Navi-knob™ (rotate) Select/Send Key Mode Key (press) Emergency Key Alphanumeric Keypad Navigation Keys Cancel/Home Key PEI Port COLOUR CONSOLE Navi-knob™ (rotate) Mode Key (press) Soft Key (Default is Missed Event Key) Blue LED Select/Send Key Navigation Keys Emergency Key TRI-Colour LED VAC Alphanumeric Context Keys TETRA Terminals Product Guide Cancel/Home Key Keypad Page 35 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 HANDSET BASED CONSOLE Front Navi-Keys Emergency Key Mode Key PTT Navigation Keys Select/Send Key Cancel/Home Key Alphanumeric Keypad Rear Earpiece Microphone TETRA Terminals Product Guide Page 36 of 47 Issue 15 © Sepura plc 2014
sepura MOD-10-1164 APPLICATIONS INTERFACE UNIT Accessory Connection Connection to Transceiver PTT Jack Socket Programming Lead Connection Microphone Jack Socket Accessory Connection (not used if Jack Sockets are in use) MOBILE / GATEWAY RADIO ACCESSORIES CONSOLE AND APPLICATIONS INTERFACE UNIT The Mobile/Gateway radio supports the connection of up to two console units.
sepura MOD-10-1164 o o none to two VAC handsets none to two VAC speaker microphones (which may be configured as fist microphones) Handset Based Console: o built-in handset o none to one hands-free kit MOBILE / GATEWAY RADIO AUDIO CONTROL The Mobile/Gateway radio supports the concept of a single controlling audio accessory for a call. The controlling audio accessory is the one in control of the call, and the only one on which the microphone becomes active.
sepura MOD-10-1164 RADIO OPERATION See the Sepura TETRA Radios User Guides for information regarding the user operation of the radios.
sepura MOD-10-1164 HEALTH AND SAFETY USER INFORMATION The STP8X series radios must not be used in environments exceeding those listed in the Regulatory statements section of this user guide. Please review the STP8X series conditions for safe use in the Regulatory section of this user guide. Always ensure that all STP8X series radios are in good operational condition before entering any hazardous environment. CARE OF YOUR RADIO Use only a slightly damp soft cloth for cleaning all exterior surfaces.
sepura MOD-10-1164 damage to the radios and may invalidate the warranty. For safety reasons Sepura plc do not recommend that accessories be used with a radio without first gaining approval from Sepura plc to do so. For STP8X series radios Sepura approved ATEX/IECEx Accessories must be used. The radio must not be operated unless an accessory is attached or the RuSC Cover is screwed in place.
sepura MOD-10-1164 If the screen displays 'Accessory Invalid', 'Accessory Unapproved' or 'Accessory Unsupported': a non Sepura approved accessory has been attached to the radio which may compromise the safety ratings. To ensure continued safety, after a brief period of time the radio switches off.
sepura MOD-10-1164 SIM Card and Micro SD CARD For STP8X Series radios do not insert or remove the SIM Card or Micro SD card in a hazardous environment. When closing the SIM / SD plastic cover always use a jewellers screwdriver type PH00 to undo or tighten the screw. Tighten only to 0.1 Nm, (pinch tight). This ensures that a seal is maintained. TRANSMIT INHIBIT The radio can be switched into Transmit Inhibit should the user enter a RF sensitive area (e.g. a hospital).
sepura MOD-10-1164 If the radio is used in extremely heavy rain it is possible that some water may seep behind the keys on the keypad. This will not harm the radio but may reduce the volume of the loudspeaker. If this occurs it may be easily remedied by holding the radio firmly and shaking it once or twice to remove the water. COMPLIANCE WITH STANDARDS Please see Regulatory Statements section in this User Guide for information on Compliance with Standards.
sepura MOD-10-1164 GLOSSARY Term Description Gateway A device which allows users working in Direct Mode to communicate with users in Trunked Mode. (This is often used to extend the working range of a radio) Duplex Duplex calls are telephone type calls in which both parties can talk simultaneously. ETSI European Telecommunications Standards Institute Half duplex Half duplex calls are when only one party can talk (transmit) at any time.
sepura MOD-10-1164 ACKNOWLEDGEMENTS 1) The Sepura STP8000 Series STP8X Series and SRG3900 radios contain iType™ from Monotype Imaging Inc. ® 2) The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sepura plc is under licence. Other trademarks and trade names are those of their respective owners. ® Bluetooth Qualified Device ID : B013965 3) The Independent JPEG Group The Radio software is based in part on the work of the Independent JPEG Group.
sepura MOD-10-1164 NOTICE All rights reserved. This document may not be reproduced in any form either in part or in whole without the prior written consent of Sepura plc, nor may it be edited, duplicated or distributed using electronic systems. Company and product names mentioned in this document may be protected under copyright or patent laws. The information in this document is subject to change without notice and describes only the products defined in this document.
