User's Manual

PRELIMINARY DATA SHEET • SKY66430-11: LTE FOR IoT SYSTEM-in-PACKAGE
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
204412F • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • August 26, 2019 25
 Further Labelling Requirements may apply dependent on the FCC rule parts relevant to the host product.
 End-Product User Instructions / Notices in the Manual
At a minimum, end-product users must be provided with the following notices at a prominent location of the product literature furnished
with the product:
* Product Modifications
Modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
* RF Exposure Compliance
This equipment complies with FCC radio frequency radiation exposure rules and limits set
forth for an uncontrolled environment, when installed and operated with minimum distance
of 20cm between its radiating structures (antenna) and the body of nearby persons and
when not operated simultaneously with other nearby
radio-transmitters.
 Maximum Antenna Gain
The user instructions of end-products equipped with standard external antenna connectors for the modular radio transmitter providing
the option to connect other antennae than those which may or may not be bundled with the end-product must list the maximum allowed
antenna gain values as derived from those given above, accounting for the cable attenuations of the actual installation.
 Digital Device - Unwanted Emissions Notice
If the end-product is or contains a digital device (unintentional radio portions) and is not exempted by its use case (like vehicular use)
the following part 15.105 (b) user notice shall be provided at prominent location of the product literature:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
o Consult the dealer or an experienced radio/TV technician for help
 Further User Notices
May be required dependent on the FCC rule parts relevant to the host product.
 Non-Allowed User Instructions
The end-product user guidance may NOT include instructions about how to install or de-install the module.