Data Sheet
Table Of Contents
- Datasheet
- Preface
- About this Datasheet
- Product Features
- Regulatory Approval
- Physical Characteristics
- 3.1 ECCN and Part Number
- 3.2 Electrical Operating Conditions
- 3.3 Environmental Operating Conditions
- 3.4 Power Supply Dimensioning
- 3.5 I/O Characteristics
- 3.6 Auxiliary ADC
- 3.7 Performance
- 3.8 Component Reliability
- 3.9 Package Description
- 3.10 Packing Information
- 3.11 Storage Conditions
- 3.12 Mounting Considerations
- Signal and Pins
- Acronyms
PHYSICAL CHARACTERISTICS
ELECTRICAL OPERATING CONDITIONS
GM01Q DATASHEET PROPRIETARY 8
SEQUANS Communications
3.2 Electrical Operating Conditions
3.2.1 Detailed Information
Table 3-2 describes the electrical operating conditions for GM01Q.
Note:
1. The maximum current consumption allowed from the 1V8
reference pin is 100 mA.
2. Each output reference voltage (1V8, 3V0) can be either
running or powered off depending on the internal software
configuration. They should not be used to power external IC
or parts that require permanent supply.
Table 3-2: Electrical Operating Conditions
Direction Minimum Typical Maximum
VBAT1 In 3.1 V 4.5 V
SIM_VCC (1.8 V or 3.0 V) Out 1.62 V 1.8 V 1.98 V
2.7V 3.0V 3.3V
1V8
See notes below.
Out 1.71 V 1.8 V 1.89 V
3V0
See note 2 below.
Out 2.85 V 3.0 V 3.15 V
VCC1_PA In 2.85 V 3.0 V 3.3 V
VCC2_PA In 2.85 V 3.0 V 3.3 V