Data Sheet

INTERFACES
GPIO
16 P
ROPRIETARY GM02S DATASHEET (PRELIMINARY)
SEQUANS Communications
2.9 GPIO
There is a total of 33 GPIOs available on GM02S: 28 named GPIO1 to GPIO28
and 5 named GPIO31 to GPIO35. The GPIOs listed in Table 2-11 are not
enabled by default. Changing their state can be done by software.
The GPIOs are documented throughout this datasheet based on their shared
or assigned function. In addition to the GPIO there are 5 wake signals
available (documented in Section 2.10 Other Signals on page 17).
Table 2-11: GPIOs Disabled by Default
GPIO Range Enable State by Default
GPIO3 to GPIO11 Disabled
GPIO17 to GPIO28 Disabled
GPIO31 to GPIO32 Disabled