Data Sheet

REGULATORY APPROVAL
FCC REGULATORY APPROVAL
36 PROPRIETARY GM02S DATASHEET (PRELIMINARY)
SEQUANS Communications
4.1 FCC Regulatory Approval
FCC-ID: 2AAGMGM02SA (single modular approval)
This above identified LTE radio module is not intended to be provided to
end-users but is for installation by OEM integrators only.
Installation/Integration
OEM integrators must follow Sequans installation instructions to provide for
and benefit from FCC compliant module integrations and must abide
especially by the following:
The maximum antenna gain values (accounting for cable attenuation) to
comply with the FCC maximum ERP/EIRP limits and with RF Exposure rules:
LTE band 2 (1900 PCS): 8.0 dBi
LTE band 4 (AWS-1): 5.0 dBi
LTE band 5 (850): 9.4 dBi
LTE band 12 (700a): 8.6 dBi
LTE band 13 (700c): 9.1 dBi
LTE band 17 (700b): 8.7 dBi
LTE band 25 (1900+): 8.0 dBi
LTE band 66 (AWS-3): 5.0 dBi
The Sequans' module integration guidelines must be closely followed.
Compliance of host integrations of the module is limited to hosts adaptation
designs which are identical to Sequans' reference design.
Host integrations with adaption designs deviating from Sequans' reference
design require either class 2 permissive change to this modular approval or a
separate host approval with different FCC-ID;
Host integrations with co-located (simultaneously operating) radio
transmitters must be evaluated in accordance with FCC multi-transmitter
rules and may require either class 2 permissive change to this modular
approval or a separate host approval with different FCC-ID, dependent on the
result of the evaluation; Inquiry at FCC or a TCB is urgently recommended.
Integrations of the module into host products which are intended for portable
use, i.e. less than 20cm distance between its radiating structures (antenna) and
the body of nearby persons, or which otherwise put additional technical
requirements like Hearing Aid compatibility require either class 2 permissive
change to this modular approval or a separate host approval with different
FCC-ID;