User's Manual

SEQUANS Communications Confidential and Proprietary
GM01Q/NB01Q User Manual,
Revision 1 Application Note
12/22
4.2. Console Terminal
 Connecting a Serial terminal to the COM port mapped on UART 2 of the Test Kit, will
allow you to access to the Test Kit Console. The Console is a maintenance window, not
necessary for regular operations, however it is useful to have it during maintenance
phases, such Firmware upgrade or to observe the boot messages after hitting the reset
button.
Console Window
4.3. Connecting the Kit to a network
 If you have access to a Cat-M 4G network or simulator
o Connect the RF cable or the Antenna in the RF port of the Kit
o Insert your SIM card in the SIM slot –cf Board Preparation-
o To check the SIM card state,
 From the terminal, enter AT+CPIN?
 Response will be
 +CPIN: <code>
o <code> = Ready : SIM card is present and unlocked
o <code>=SIM PIN : Modem is waiting SIM PIN to be
entered
o <code>= SIM PUK : Modem is waiting SIM PUK to be
given
 or ERROR, when SIM is not inserted or not detected