User's Manual

SEQUANS Communications Confidential and Proprietary
GM01Q/NB01Q User Manual,
Revision 1 Application Note
16/22
 From this location you can run the sqncom2ppp program.
usage:
sqncom2ppp [-h] {list,create,connect,disconnect,remove}.
commands:
list list all COM ports available.
create configure COM port.
connect configure COM port and establish connection.
disconnect find establish PPP connection and terminate it.
remove destroy PPP interface.
optional arguments:
-h, --help show this help message and exit.
 Create the Modem interface, by typing
sqncom2ppp create COMxx
COMxx is one of the COM ports associated to the Test Kit.
You can use the one associated to AT Commands or to DM Tools
 Configure the Modem interface - the first time you use PPP-
Open Windows Control Panel, section Phone and Modem. Click on
Modems tab. You can see the new modem in the list.
Then click on Change Settings