User's Manual

Confidential and Proprietary SEQUANS Communications 11
3 FCC Regulatory Notices to the
OEM and End product Users
FCC-ID: 2AAGMUS130Q (limited modular approval)
This above identified LTE radio module is not intended to be provided to end-users but is for
installation by OEM integrators only.
Installation/Integration
OEM integrators must follow Sequans installation instructions to provide for and benefit from FCC
compliant module integrations and must arbide especially by the following:
The maximum antenna gain values (accounting for cable attenuation) to comply with the FCC
maximum ERP/EIRP limits and with RF Exposure rules:
LTE band 13 (700MHz): 8.9 dBi
LTE band 4 (1700MHz): 5.0 dBi
The Sequans PCB design guidelines provided with this filing must be closely followed.
Compliance of host integrations of the module is limited to hosts adaption designs which are identical
to the documented reference design as documented in this filing (M.2 adaptation PCB). Design
guidance for host integration are provided under NDA.
Host integrations with adaption designs deviating from the documented reference design require
either class 2 permissive change to this modular approval or a separate host approval with different
FCC-ID;
Host integrations with co-located (simultaneously operating) radio transmitters must be evaluated in