User's Manual

Appendix D – FCC regulations
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE: FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This device is intended only for OEM integrators under the following conditions:
1. The antenna must be installed such that 20 cm is maintained between the antenna and
users, and
2. The transmitter module may not be co-located with any other transmitter or antenna,
As long as 2 conditions above are met, further transmitter test will not be required. However, the
OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed.
The product using this module must also comply with the maximum antenna gain to meet FCC EMC
and RF exposure related limits. The modular grant lists those maximum gain values.
The OEM integrator needs show that the product hosting this module needs to be compliant with
radiated and conducted emissions limits for unintentional radiators (digital devices) per 15B testing
(limits in part 15.107 and 15.109, respectively).
IMPORTANT NOTE:
In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID cannot be used on the final product. In these circumstances, the
OEM integrator will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate FCC authorization.
SEQUANS Communications Confidential and Proprietary
US60L_Setup_Instruction_R01
17/18