User Manual

Confidential and Proprietary SEQUANS Communications 10
3 General Procedures
3.1 Connect the VZ20Q-EVK
For the first installation of the VZ20Q-EVK on the PC, please follow the procedure described in Section 2.
There is no other specific operation required for the later connections. Plug the VZ20Q-EVK on a USB port
of your PC and wait for the “Device ready” Windows message display. The VZ20Q-EVK is then ready.
3.2 Launch the WebUI
Launch a web browser and connect to the following URL: http://192.168.15.1.
3.3 Disconnect the VZ20Q-EVK
Use Windows standard Eject device procedure before physically disconnect the VZ20Q-EVK.
3.4 Programming Instructions
See Applications Software Development Guide.