Integration Guide
Table Of Contents
- Module Integration Guide
- Preface
- About this Guide
- Introduction
- Manufacturing Process
- Hardware Integration Recommendations
- PCB Layout Rules
- Bring-Up and Testing
- Hardware Test Preparation
- Abbreviations
MODULE INTEGRATION GUIDE PROPRIETARY 37
SEQUANS Communications
A
Hardware Test
Preparation
A.1 RF Interfaces Preparation
A.1.1 LTE RF Test Preparation
Note: The list of the test equipment compatible with the tests is to be
found in Section 1.2 of 4G-EZ DV Tool User Manual.
To ensure that the RF test platform will provide the most reliable interface for
testing. The following setup is proposed when measuring RF characteristics of
the VZM20Q System.
The shield box cavity is configured as shown on Figure A-1:
• The DUT is connected to the computer by UART2.
• The DUT is also connected by one RF cable.