Integration Guide
Table Of Contents
- Sequans Monarch Go-GPS BLE
- Datasheet and Hardware Integration Guide
- Legal Notices
- Document Revision History
- Table of Contents
- Introduction
- 1. Product Datasheet
- 1.1. General Description
- 1.2. Applications
- 1.3. System Architecture
- 1.4. Mechanical Overview
- 1.5. Product Characteristics
- 1.6. Digital board-to-board connector
- 1.7. Electrical
- 1.8. Environmental
- 1.9. Mechanical drawings
- 1.10. Label
- 1.11. Certifications
- 1.12. Regulatory Approval
- 1.13. Export Control Certification Number (ECCN)
- 2. Integration guideline
- 3. Verizon SIM sign-up procedure to activate ThingSpace IoT SIM
- 4. Troubleshooting
Confidential and Proprietary
Monarch Go-GPS-BLE Datasheet and Hardware Integration Guide, Rev 1
5/28
1.4. Mechanical Overview
Monarch Go-GPS BLE dimensions: 35 mm (1.38”) x 50 mm (1.97”) x 14.95 mm (0.59”)
Plastic enclosure, black color
Fixable with two M2 screws and two metal nuts soldered on customer’s PCB. They are delivered
when ordering Monarch Go-GPS BLE
Verizon ThingSpace SIM pre-installed (3FF)
Embedded LTE & GNSS & Bluetooth low energy antenna
Three LEDs, one for LTE-M1 modem activity, one for GPS activity and one for BLE
Low profile 20-pin digital board-to-board connector to connect customer MCU application
controller
Optional board-to-board flex cable 150 mm (5.9“) between Monarch Go-GPS BLE and customer
MCU application board. Orderable separately
16 g weight
Monarch Go-GPS BLE : Top view Monarch Go-GPS BLE : Bottom view
Board-to-board flex cable (optional)
M2 screws
LTE, GPS, BLE LED
Metal nuts
Digital
board-to-board
connector
SIM cover
Connector
to customer MCU application board
Connector
to Monarch Go-GPS BLE